https://infotechys.com/install-a-kubernetes-cluster-on-rhel-9

https://www.youtube.com/watch?v=_ELvCuXO6y4

https://medium.com/weeklycloud/kubernetes-installation-on-rhel-9-d5629f2fa4f9

https://www.youtube.com/watch?v=vX2n05t0AQg&t=1782s

Prerequisites

Update the System

You can choose to disable or adjust selinux and the firewall setting.

Start disabling the firewall and selinux

Disable selinux

setenforce 0 sed -i 's/^SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config

Disable firewall

systemctl disable firewalld.service

End disabling the firewall and selinux

Start adjusting the firewall and selinux

Adjust selinux

setenforce 0 sed -i --follow-symlinks 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/sysconfig/selinux

For Kubernetes components to communicate effectively across nodes, certain ports must be opened in the firewall. These ports enable essential Kubernetes communication and control functions:

• 6443/tcp: Kubernetes API server
• 2379–2380/tcp: etcd server (used for storing cluster data)
• 10250–10252/tcp: kubelet API and control plane services
• 10257–10259/tcp: Scheduler and controller manager
• 179/tcp: BGP (for networking plugins, if used)
• 4789/udp: VXLAN (for pod networking, if using overlay networks)

Commands to Open Ports on the Control Plane Node

firewall-cmd --permanent --add-port={6443,2379,2380,10250,10251,10252,10257,10259,179}/tcp firewall-cmd --permanent --add-port=4789/udp firewall-cmd --reload

These ports facilitate node-to-node communication and pod access:

• 10250/tcp: kubelet API on worker nodes
• 30000–32767/tcp: NodePort range for services exposed to external access
• 179/tcp: BGP (if using)
• 4789/udp: VXLAN (for overlay network communication)

Commands to Open Ports on Worker Nodes

firewall-cmd --permanent --add-port={179,10250,30000-32767}/tcp firewall-cmd --permanent --add-port=4789/udp firewall-cmd --reload

End adjusting the firewall and selinux

Epel Release

subscription-manager repos --enable codeready-builder-for-rhel-9-$(arch)-rpms dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm 

After Epel installation rerun the upgrade to update if any are needed

dnf upgrade -y

If you are running on a virtual machine run the following

dnf install open-vm-tools -y sysctl vm.swappiness=10

Install vim color for scripting

dnf install git -y git clone https://github.com/flazz/vim-colorschemes ~/.vim/ cp ~/.vim/colors/desert.vim /etc/vimrc.local

Step 1: Install Kernel Headers

First, ensure that you have the appropriate kernel headers installed on your system (on each node). You can install them using the following command:

dnf -y install kernel-devel-$(uname -r)

Step 2: Add Kernel Modules

To load the necessary kernel modules required by Kubernetes, you can use the modprobe command followed by the module names (on each node). Here’s how you can do it:

modprobe br_netfilter modprobe overlay

These commands load the required kernel modules (br_netfilter, overlay) that are essential for Kubernetes to function properly and facilitate communication within the Kubernetes cluster.

By loading these modules, you ensure that your servers are prepared for Kubernetes installation and can effectively manage networking and load balancing tasks within the cluster.

Next, create a configuration file (as the root user on each node) to ensure these modules load at system boot:

cat > /etc/modules-load.d/k8s.conf << EOF br_netfilter overlay EOF

Step 3: Configure Sysctl

To set specific sysctl settings (on each node) that Kubernetes relies on, you can update the system’s kernel parameters. These settings ensure optimal performance and compatibility for Kubernetes. Here’s how you can configure the necessary sysctl settings:

cat > /etc/sysctl.d/k8s.conf << EOF net.ipv4.ip_forward = 1 net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 EOF

These commands adjust the following kernel parameters:

By setting these sysctl parameters, you ensure that your system is properly configured to support Kubernetes networking requirements and forwarding of network traffic within the cluster. These settings are essential for the smooth operation of Kubernetes networking components. Run the following command to apply the changes:

sysctl --system

Step 4: Disabling Swap

To disable swap on each server in your Kubernetes cluster, you can follow these steps:

swapoff -a

This command turns off all swap devices.

sed -e '/swap/s/^/#/g' -i /etc/fstab

Using the sed command (above), you can locate the line that contains the swap entry comment it out by adding a # at the beginning of the line.

#/dev/mapper/vg00-swap none swap defaults 0 0

Step 5: Install Containerd

In this step, we’ll install Containerd on each node. Containerd serves as a crucial container runtime responsible for managing and executing containers, which serve as the fundamental units of Kubernetes applications. Containerd provides the necessary infrastructure for container orchestration, ensuring efficient deployment and management of containerized workloads within the Kubernetes ecosystem.

Add the Docker CE Repository

Before proceeding with the installation of Containerd, we first need to add the Docker Community Edition (CE) repository to our system. Docker CE is the free version of Docker, offering essential components for container management. Adding this repository ensures we have access to the latest Docker CE packages for installation.

dnf config-manager --add-repo https://download.docker.com/linux/rhel/docker-ce.repo

Update Package Cache

After adding the repository, it’s essential to update the package cache to ensure the latest package information is available:

dnf makecache

Now, install the containerd.io package:

dnf -y install containerd.io

Configure Containerd

After installing Containerd, the next step is to configure it to ensure optimal performance and compatibility with your environment. The configuration file for Containerd is located at /etc/containerd/config.toml. While the default configuration provides a solid starting point for most environments, we’ll make a small adjustment to enable Systemd Cgroup support, which is essential for proper container management. Let’s proceed with configuring Containerd:

cat /etc/containerd/config.toml

Run the following command to build out the containerd configuration file:

sh -c "containerd config default > /etc/containerd/config.toml" ; cat /etc/containerd/config.toml > /dev/null 2>&1

Using your preferred text editor, open the /etc/containerd/config.toml file and set the SystemdCgroup variable to true (SystemdCgroup = true):

sed -i 's/SystemdCgroup \= false/SystemdCgroup \= true/g' /etc/containerd/config.toml

This configuration change enables SystemdCgroup support in Containerd, ensuring compatibility with Systemd-managed containers. Once you’ve made these adjustments, Containerd will be configured with SystemdCgroup support, providing enhanced compatibility for managing containers within a Systemd environment.

Save and exit the file. Then, run the following command to start and enable containerd.service upon reboot.

systemctl enable containerd.service systemctl restart containerd.service

Reboot your machine.

systemctl reboot

Then, run this command to verify the status of the containerd.service. It should be up and running:

systemctl status containerd.service

Step 7: Install Kubernetes Components

To install Kubernetes components (kubelet, kubeadm, and kubectl) and add the Kubernetes repository to your package manager, you can follow these steps:

Add Kubernetes Repository

First, add the Kubernetes repository (as the root user) to your package manager. For example, on RHEL/CentOS version 8+, you can use the following command:

cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo [kubernetes] name=Kubernetes baseurl=https://pkgs.k8s.io/core:/stable:/v1.33/rpm/ enabled=1 gpgcheck=1 gpgkey=https://pkgs.k8s.io/core:/stable:/v1.33/rpm/repodata/repomd.xml.key exclude=kubelet kubeadm kubectl cri-tools kubernetes-cni EOF

Install Kubernetes Packages

Once the repository is added, you can proceed to install the Kubernetes components (kubelet, kubeadm, and kubectl) using the package manager. Run the following command:

dnf makecache; dnf install -y kubelet kubeadm kubectl --disableexcludes=kubernetes

The --disableexcludes=kubernetes flag ensures that packages from the Kubernetes repository are not excluded during installation.

Start and Enable kubelet Service

After installing kubelet, start and enable the kubelet service to ensure it starts automatically upon system boot:

systemctl enable kubelet.service systemctl restart kubelet.service

To verify the installation thus far use the following:

kubeadm version kubelet --version kubectl version --client

Don’t worry about any kubelet errors at this point. Once the worker nodes are successfully joined to the Kubernetes cluster using the provided join command, the kubelet.service on each worker node will automatically activate and start communicating with the control plane. The kubelet is responsible for managing the containers on the node and ensuring that they run according to the specifications provided by the Kubernetes control plane.

Install a Kubernetes Cluster on RHEL 9.x | CentOS 9.x: Master Node Configuration

NOTE: Up until this point of the installation process, we’ve installed and configured Kubernetes components on all nodes. From this point onward, we will focus on the master node.

Step 8: Initializing Kubernetes Control Plane

Great! Let’s proceed with initializing the Kubernetes control plane on the master node. 

sudo kubeadm config images pull

This command initializes the Kubernetes control plane on the master node. The --pod-network-cidr flag specifies the range of IP addresses for the pod network. Adjust the CIDR according to your network configuration if needed.

Here’s how we can do it:

kubeadm init --pod-network-cidr 10.244.0.0/16 --control-plane-endpoint "[IP Address]:6443" --upload-certs --v=5

After executing this command, Kubernetes will pull the necessary container images from the default container registry (usually Docker Hub) and store them locally on the machine. This step is typically performed before initializing the Kubernetes cluster to ensure that all required images are available locally and can be used without relying on an external registry during cluster setup.

Set Up kubeconfig File

Set up the kubeconfig file to enable communication with the Kubernetes cluster. Run the following commands:

mkdir -p $HOME/.kube cp -i /etc/kubernetes/admin.conf $HOME/.kube/config chown $(id -u):$(id -g) $HOME/.kube/config

Deploy Pod Network

To enable networking between pods across the cluster, deploy a pod network. For example, deploy the Tigera Operator for Calico:

kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.30.1/manifests/tigera-operator.yaml

To download the custom Calico resources manifest, you can use the curl or wget command to fetch the YAML file from the Calico project’s GitHub repository. Here’s how you can do it using curl:

curl -O https://raw.githubusercontent.com/projectcalico/calico/v3.30.1/manifests/custom-resources.yaml

Or Using wget:

wget https://raw.githubusercontent.com/projectcalico/calico/v3.30.1/manifests/custom-resources.yaml

Adjust the CIDR setting in the custom resources file:

sed -i 's/cidr: 192\.168\.0\.0\/16/cidr: 10.244.0.0\/16/g' custom-resources.yaml

Finally, create the Calico custom resources:

kubectl create -f custom-resources.yaml

Step 9: Join Worker Nodes

After successfully initializing the Kubernetes control plane on the master node, you’ll need to join the worker nodes to the cluster. Kubernetes provides a join command that includes a token and the master node’s IP address to allow worker nodes to connect to the cluster. Here’s how you can do it:

Get Join Command on Master Node

On the master node, run the following command to generate the join command along with a token:

kubeadm token create --print-join-command

This command generates a join command with a token that allows worker nodes to join the cluster. It also includes the master node’s IP address.

Run Join Command on Worker Nodes

Copy the join command generated in the previous step and run it on each worker node. The join command typically looks like this:

kubeadm join <MASTER_IP>:<MASTER_PORT> --token <TOKEN> --discovery-token-ca-cert-hash <DISCOVERY_TOKEN_CA_CERT_HASH>

Verify Worker Node Join

After running the join command on each worker node, switch back to the master node and run the following command to verify that the worker nodes have successfully joined the cluster:

kubectl get nodes

This command should list all the nodes in the cluster, including the master node and the newly joined worker nodes. The status of the worker nodes should be “Ready,” indicating that they have successfully joined the cluster and are ready to accept workloads.

NGINX Test Deployment

To test your Kubernetes cluster, you can deploy a simple application such as a NGINX web server. Here’s a sample YAML manifest to deploy NGINX as a test deployment:

apiVersion: apps/v1 kind: Deployment metadata: name: nginx-deployment labels: app: nginx spec: replicas: 3 selector: matchLabels: app: nginx template: metadata: labels: app: nginx spec: containers: - name: nginx image: nginx:latest ports: - containerPort: 80

Deploy NGINX

kubectl apply -f nginx-deployment.yaml

deployment.apps/nginx-deployment created

This deployment will create three replicas of NGINX pods in your cluster. Each pod will run an NGINX container exposing port 80. To check the status of your deployment, use the following command:

kubectl get deployments

NAME READY UP-TO-DATE AVAILABLE AGE nginx-deployment 3/3 3 3 2m40s

To verify that the NGINX pods are running, use:

kubectl get pods

NAME READY STATUS RESTARTS AGE nginx-deployment-7c79c4bf97-gnbfn 1/1 Running 0 6m6s nginx-deployment-7c79c4bf97-tmbpg 1/1 Running 0 6m6s nginx-deployment-7c79c4bf97-vgh42 1/1 Running 0 6m6s

Expose NGINX to the external network

Once the pods are up and running, you can expose the NGINX service to the external network using a Kubernetes Service:

apiVersion: v1 kind: Service metadata: name: nginx-service spec: selector: app: nginx ports: - protocol: TCP port: 80 targetPort: 80 type: LoadBalancer

kubectl apply -f nginx-service.yaml

service/nginx-service created

This will create a Service of type LoadBalancer, which exposes the NGINX deployment to the external network. To get the external IP address of the NGINX service, you can use:

kubectl get service nginx-service

Once you have the external IP address, navigate to it in a web browser. You should see the default NGINX welcome page, indicating that your Kubernetes cluster is successfully serving web traffic.